X-BAR
SAS X-BAR Specification Table
CHEMICAL PROPERTIES OF SAS X-BAR
| Name of Elements | SAS X-BAR 500+ | SAS X-BAR 400+ | SAS X-BAR 300+ |
|---|---|---|---|
| Carbon (C) | 0.15 - 0.25 | 0.20 - 0.33 | 0.15 - 0.25 |
| Manganese (Mn) | 0.75 - 0.90 | 1.00 - 1.65 | 0.75 - 0.90 |
| Silicon (Si) | 0.25 Max | 0.25 Max | 0.25 Max |
| Sulfur (S) | 0.05 Max | 0.05 Max | 0.05 Max |
| Phosphorus (P) | 0.04 Max | 0.05 Max | 0.04 Max |
| PCopper (Cu) | 0.20 Max | 0.25 Max | 0.20 Max |
All other tramp elements are kept near traces
PHYSICAL PROPERTIES OF SAS X-BAR
| Parameters | SAS X-BAR 500+ | SAS X-BAR 400+ | SAS X-BAR 300+ |
|---|---|---|---|
| Yield Strength. min. | 72,500 psi 500 Mpa |
60,175 psi
415 Mpa |
43,500 psi
300 Mpa |
| Tensile Strength. min. | 83,375 psi
575 Mpa |
90,045 psi
620 Mpa |
60,175 psi
415 Mpa |
| % Of Enongation in 8in | 14% | 14% | 16% |
| UTS/YS. min | 1.15 | 1.25 | >1.35 |
BEND TEST REQUIREMENTS OF SAS X-BAR
| Bar Size | P in Diameter for 180° Bend Test | P in Diameter for 180° Bend Test | P in Diameter for 180° Bend Test |
|---|---|---|---|
| (mm) | 60G /400+ | 72G/ 500+ | 40G/ 300+ |
| 8, 10, 12, 16 | 3.5d | 3d | 3d |
| 20, 22, 25 | 5d | 4d | 5d |
| 28, 32 | 7d | 6d | Not specified |
Note: d= nominal Diameter of Specimen
Bar Size, Nominal Weights, Dimensions, etc Of SAS X-BAR
| Bar Nominal Diameter |
Nominal Weight (kg/m) |
Cross-sectional area |
App. Lengths/M. Ton | App. Lengths/M. Ton |
|---|---|---|---|---|
| mm | kg/m | mm² | meter | ft. |
| 8 | 0.395 | 50.27 | 2534 | 8313 |
| 10 | 0.616 | 78.54 | 1621 | 5320 |
| 12 | 0.888 | 113.10 | 1126 | 3.694 |
| 16 | 1.579 | 201.06 | 633 | 2078 |
| 20 | 2.466 | 314.16 | 405 | 1330 |
| 22 | 2.985 | 380.13 | 335 | 1099 |
| 25 | 3.854 | 490.88 | 259 | 851 |
| 28 | 4.836 | 615.75 | 206 | 678 |
| 32 | 6.313 | 804.25 | 158 | 519 |
| 38 | 8.900 | 1134.11 | 112 | 368 |